For all coolants
Type MWHOSE is made of EPDM rubber with inserts of plastic fabric and steel spiral. For cooling water no matter if suction or pressure side (max. pressure 2,5 bar), as well as salt and fresh water. Temperature resistant between -30º and +120ºC.
Unlike unreinforced hoses, these hoses do not twist or kink, thus eliminating one of the main reasons for poor cooling water flow and protecting against damage to the impeller, water pump or exhaust system.
These hoses can also be used for other purposes (e.g. cockpit drain and other critical lines).
|Shipping weight:||0,70 Kg|
By entering the article number of the main unit in the search-box, all available spare parts for this main article will be shown. Usually this number is printed on the type plate of the main unit, on the cover or body of impeller pumps, or in your documentation on board.
Alternatively you may navigate through the menu via manufacturer brand and series of the main unit in order to receive the list of available spare parts.
Please contact us in case you need an exploded view of the main unit, if you are struggling on site to clearly determine the required part, or if you need further parts that are not shown in the shop.