With a pump with an electromagnetic clutch, you have the power you need at the touch of a button without having to be at the pump. When used in conjunction with a vacuum switch (recommended when used as a bilge pump), the clutch automatically disengages when the pump draws in air, preventing dry running and damage to the pump. Automatically controlled pumps are available in sizes 1" to 2 ½" (20 l/min to 625 l/min). Coupling 12 V or 24 V. Wear parts can be easily replaced and service kits are available for all standard models. Vacuum switch available as accessory. Coupling must be ordered separately.
Pump Housing: bronze Connection for vacuum switch
Shaft: stainless steel shaft with permanently lubricated
double ball bearings
Seal: mechanical seal
Cam: full or partial comb
Connection: Port Adaptor Kit
Clutch: Electromagnetic 12/24 V DC
Pulley: 2xA or 1xB groove
Pulley Ų: 178 mm / 7"
Impeller: 09-802B (09-814B*)
Weight: 13.2 kg - 27 Ibs
Length: 290 mm - 11.4'
Height: 200 mm - 7.87'
Width: 151 mm - 5.94'
*Pump with nitrile impeller available on request.
|Shipping weight:||10,10 Kg|
By entering the article number of the main unit in the search-box, all available spare parts for this main article will be shown. Usually this number is printed on the type plate of the main unit, on the cover or body of impeller pumps, or in your documentation on board.
Alternatively you may navigate through the menu via manufacturer brand and series of the main unit in order to receive the list of available spare parts.
Please contact us in case you need an exploded view of the main unit, if you are struggling on site to clearly determine the required part, or if you need further parts that are not shown in the shop.